Stock : 5


  • Model: D-Link DGS-1210-28
  • 4 x Gigabit BASE-T / SFP Combo Ports
  • 24 x Fast Power-over-Gigabit Ports
  • Smart IP-MAC-Port Binding
  • Auto Voice VLAN & Surveillance VLAN


24 x 10/100/1000BASE-T | 4 x 100/1000 Mbps G b E /SFP combo ports




Operating Temperature: 23 to 122 ˚F (-5 to 50 ˚C) Storage Temperature: -4 to 158 ˚F (-20 to 70˚C) Operating Humidity: 0% to 95% non-condensing Storage Humidity: 0% to 95% non-condensing

Dimensions (L x W x H )

17.32 x 5.51 x 1.73 inches (440 x 140 x 44 mm)


3.68 lbs (1.67 kg)

Power Supply

100 to 240 VAC 50/60 Hz internal universal power supply Maximum Power Consumption: 22.45 W Standy Power Consumption: 17.65 W/110 V, 17.84 W/240 V

Data transfer rate

Full/Half-duplex for 10/100 Mbps Full-duplex for 1000 Mbps

Transmission Method


Network Standard

IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control

MAC Address Table

MAC Address Table: 8k entries Static MAC Addresses: 256 entries


1 years

D-Link DGS-1210-28 28-Port Smart Managed Gigabit Switch

The DGS-1210-28 being featured as D-Link Green 3.0 technology is equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. The switches comply with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configuration features ensures your network remains protected after an upgrade from IPv4 to IPv6. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, these switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles. D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses.


This D-Link DGS-1210-28 24-Port Gigabit Switch comes with 01 year warranty.